Drone Ops Consultants

Thermal inspection

Roof, solar, building, powerline

Thermal inspection by drone uses a radiometric infrared camera to find heat patterns that point to defects: missing insulation and trapped moisture in roofs, failing cells and connections on solar arrays, and hot joints on electrical equipment. For an operator, adding it means flying close to buildings and live equipment, meeting new competence expectations and handling more sensitive data.

This guide covers what operators typically need in place before offering thermography, and how a drone operations consultant can help.

Vetted consultants

2 results

Cranfield Aerospace Solutions Ltd

Cranfield, GB

From Concept to Certification. Trusted UK SORA, Airworthiness & Design Engineering Experts.

Cranfield Aerospace Solutions (CAeS) is one of the UK's leading aviation engineering and certification organisations, providing independent consultancy services for UK SORA, RPAS airworthiness, aircraft design, modification, and regulatory approval. With over 30 years of aerospace engineering excellence, CAeS supports clients across civil, defence, and uncrewed aviation sectors, helping organisations navigate complex regulatory challenges and bring innovative aircraft and UAV systems into operation safely and compliantly. Our multidisciplinary team delivers end-to-end support, from operational concept development and UK SORA assessments through to aircraft design, safety analysis, flight test programmes, certification planning, and regulatory engagement. We combine practical engineering experience with deep airworthiness expertise to reduce programme risk, accelerate approvals, and enable successful deployment. CAeS has contributed to more than 750 air vehicle programmes, including conventional aircraft, rotorcraft, advanced air mobility platforms, defence systems, and next-generation uncrewed aircraft. Recent projects have included the development of hydrogen-electric propulsion systems and hydrogen-native UAV platforms, placing CAeS at the forefront of sustainable aviation innovation. As a holder of UK CAA Part 21J Design Organisation Approval, BCAR A8-21 approval, and MAA DAOS approval covering aeroplanes, helicopters, and RPAS, CAeS offers a unique combination of regulatory authority, practical engineering capability, and operational experience. Our team regularly supports compliance strategies across CS-23, CS-25, CS-27, CS-29 and equivalent international certification frameworks, working closely with authorities including the UK CAA, EASA, FAA, TCCA, GACA, and military airworthiness organisations worldwide. Whether you require a UK SORA submission, certification strategy, aircraft modification approval, flight-test support, or complete design engineering services, CAeS provides the expertise to take your programme from concept to certified operation.

CAAEASA

Vaspba Remote Piloted Systems Ltd

Winfrith, GB

CAA Regulatory Consultancy | Agriculture | Heavy Lift | BVLOS | Drone Forensics & Expert Witness Support

Vaspba Remote Piloted Systems Ltd is a UK specialist in uncrewed aircraft systems, regulatory consultancy and operational support. We assist organisations with CAA Operational Authorisations, PDRA and SORA applications, ConOps, Operations Manuals, risk assessments, compliance evidence and BVLOS projects. Our services also include independent drone accident investigation, flight-log analysis, technical reporting and expert-witness support for legal, insurance and commercial disputes. With practical experience in UAS design, integration, testing, servicing and operations, we provide evidence-based advice grounded in real-world aviation and engineering experience.

CAA

What the work involves, and who needs help

Most drone thermography falls into a few families, each with its own flight profile, timing and reporting expectations.

Operators usually look for help when moving from visual into thermal work, winning a first utility or insurer contract, or being asked to report against a named standard.

  • Roof and building envelope surveys (heat loss, moisture, insulation gaps)
  • Solar photovoltaic (PV) arrays, rooftop and ground-mounted
  • Electrical infrastructure such as substations and overhead lines, usually working to the network owner's procedures
  • Industrial assets such as chimneys and flare stacks

The regulatory side

In the UK, the Open category limits how close you can fly to uninvolved people and built-up areas. In the Far from People (A3) sub-category, for example, you must not fly within 150m of residential, recreational, commercial or industrial areas. Building and rooftop thermography in towns rarely fits inside Open category limits, so most operators need a Specific category operational authorization from the Civil Aviation Authority (CAA).

The simplest route for visual line of sight (VLOS) work is PDRA01, a pre-defined risk assessment that allows flights with aircraft from 250g to 25kg in congested areas, keeping 50m from uninvolved persons (30m during take-off and landing). It requires a General VLOS Certificate (GVC) or Level 1 Remote Pilot Certificate. Work outside those limits needs a UK SORA-based operational authorization, which replaced the Operating Safety Case route in April 2025.

The 120m height limit has a narrow exception for tall structures over 105m, such as chimneys: at the request of the person responsible for the structure, you may fly higher, staying within 50m of it horizontally and no more than 15m above it. From 1 January 2026, anyone flying a drone of 100g or more needs a Flyer ID, and UK1, UK2 and UK3 class drones must broadcast Remote ID.

In EU states, work beyond the Open category needs a national operational authorization based on a Specific Operations Risk Assessment (SORA), unless a standard scenario applies. In the US, Part 107 allows flight above 400ft only within a 400ft radius of a structure, and flights over people must meet an operations over people category or hold a waiver.

The Information Commissioner's Office (ICO) treats organizations using drones as controllers of the personal data they capture. Images of homes and gardens can show people, so a data protection impact assessment (DPIA) and recording only when needed are sensible defaults.

Good practice and recognized standards

Good thermography depends on conditions as much as kit. Building surveys need a clear inside-outside temperature difference, dry surfaces, light wind and no recent sun, which often means flying before dawn or after dark. Solar PV surveys need the opposite: modules working under strong, stable sunlight. Use a radiometric, calibrated camera with emissivity set for the surface.

Clients increasingly name these standards in tenders. Check the current edition of each.

  • ISO 6781-1: general procedures for detecting heat, air and moisture irregularities in buildings by infrared methods (it superseded BS EN 13187 in the UK)
  • ISO 6781-3: qualifications of equipment operators, data analysts and report writers for building thermography
  • IEC TS 62446-3: outdoor infrared thermography of PV modules and plants, including drone surveys, equipment, conditions and reporting
  • ISO 18436-7: qualification and assessment of thermographers for condition monitoring, in three categories
  • PCN certification in infrared thermography, run by the British Institute of Non-Destructive Testing (BINDT) to the relevant parts of ISO 18436

What a consultant does and doesn't do

A drone operations consultant helps you build the operation around the camera. Typical work includes checking your permissions against the jobs you want, writing thermal procedures and risk assessments for your operations manual, preparing a PDRA01 or UK SORA application, advising on payloads, planning training, and reviewing report templates.

A consultant cannot promise what a regulator will decide, and should not sign off thermal analysis without the matching qualification. Agree scope and document ownership at the start.

What to ask before hiring

Consultants listed on DOC are vetted (identity, legal entity, sanctions screening and professional indemnity insurance), and regulator experience shows as verified only where it has been evidenced. The questions below help with the rest.

  • Which regulators have you secured authorizations with, and for what kinds of operation?
  • Have you written procedures for thermal work near buildings or live electrical equipment?
  • Do you, or someone you work with, hold a recognized thermography qualification?
  • Which standards would you build our reporting around, and why?
  • What is in scope, and who owns the documents afterwards?

Common mistakes

Most problems come from treating thermography as photography with a different camera.

  • Flying building surveys in daytime sun, so solar heating masks the defects
  • Using a non-radiometric camera, then presenting temperatures as measurements
  • Promising reports to a standard nobody on the team is qualified for
  • Assuming Open category rules cover rooftop work in town centers
  • Keeping continuous footage of neighbouring homes with no DPIA or retention rule

Common questions

Do I need an operational authorization for drone thermal surveys in the UK?

Often, yes. Open category distance limits rule out most rooftop work in towns. PDRA01 covers visual line of sight flights with aircraft from 250g to 25kg, including in congested areas, if you keep 50m from uninvolved people. Anything beyond that needs a UK SORA-based operational authorization from the CAA.

What thermography qualification does a drone operator need?

There is no single legal requirement for the thermography itself, but clients increasingly expect one. For building work, ISO 6781-3 sets out qualification classes for operators, analysts and report writers. For condition monitoring, ISO 18436-7 defines three categories, and BINDT offers PCN certification in infrared thermography. Your remote pilot competence is a separate CAA requirement.

When is the best time to fly a thermal roof or building survey?

Usually before dawn or after dark on a cold, dry, still day, when there is a good temperature difference between inside and outside and the sun has not warmed the surfaces. Rain, dew, wind and sun all distort results. Solar PV surveys are the exception: they need strong, stable sunlight.

Does thermal drone imagery count as personal data under UK GDPR?

It can. The ICO treats organizations using drones as controllers of any personal data they capture, and thermal or visual images can identify people, their homes and their activities. Carry out a data protection impact assessment, record only when needed, restrict access and set a retention period.

Can I fly above 120m to inspect a tall chimney?

In the UK, only in a narrow case. If a structure is taller than 105m and the person responsible for it asks you to carry out a task on it, you may fly above 120m, but you must stay within 50m of the structure horizontally and no more than 15m above it. Other cases need specific permission.