Drone Ops Consultants

Wind & solar inspection

Renewables assets

Renewables inspection is one of the steadiest sources of commercial drone work. Wind turbine blades, towers and solar farms need regular inspection, and drones have largely replaced rope access and handheld cameras for the first look. The work is demanding: tall structures, remote sites, strict client safety systems and deliverables that must fit the owner's maintenance process.

This guide covers the permissions typically involved, what asset owners expect, and where a drone operations consultant can help.

Vetted consultants

1 result

Vaspba Remote Piloted Systems Ltd

Winfrith, GB

CAA Regulatory Consultancy | Agriculture | Heavy Lift | BVLOS | Drone Forensics & Expert Witness Support

Vaspba Remote Piloted Systems Ltd is a UK specialist in uncrewed aircraft systems, regulatory consultancy and operational support. We assist organisations with CAA Operational Authorisations, PDRA and SORA applications, ConOps, Operations Manuals, risk assessments, compliance evidence and BVLOS projects. Our services also include independent drone accident investigation, flight-log analysis, technical reporting and expert-witness support for legal, insurance and commercial disputes. With practical experience in UAS design, integration, testing, servicing and operations, we provide evidence-based advice grounded in real-world aviation and engineering experience.

CAA

What the work involves, and who needs help

Wind work centers on close visual inspection of blades (leading edge erosion, cracks, lightning damage) plus towers and nacelles. Solar work is mostly thermal and visual surveys of ground-mounted and rooftop arrays, looking for faulty modules, strings and connections across large areas.

Operators usually need help when a first framework contract lands, when a client's prequalification asks for documents they do not have, or when they want to scale from a few turbines to whole portfolios. The gap is usually in procedures, permissions and reporting that match what utilities and independent power producers expect, rather than in flying skill.

The regulatory side

In the UK, the standard height limit is 120m, and many modern turbines are taller than that at blade tip. The Drone Code allows a narrow exception for structures over 105m: at the request of the person responsible for the structure, you may fly above 120m if you stay within 50m of it horizontally and no more than 15m above it. Anything outside that needs specific permission.

Wind farms and solar sites are often rural, but many sites have staff, public footpaths or nearby buildings, so Open category limits may still be tight. Visual line of sight (VLOS) inspection can often be done under PDRA01, the Civil Aviation Authority's pre-defined risk assessment, which needs a General VLOS Certificate (GVC) or Level 1 Remote Pilot Certificate. Large solar surveys flown beyond visual line of sight (BVLOS), or unusual operations such as launching offshore, generally need a UK SORA-based operational authorization.

In EU states, operations outside the Open category need a national operational authorization based on a Specific Operations Risk Assessment (SORA), unless they fit a declared standard scenario. In the US, Part 107 allows flight above 400ft only within a 400ft radius of a structure and no higher than 400ft above its top, which suits turbine work. BVLOS in the US still needs a waiver, while the FAA's proposed Part 108 BVLOS rule remains in rulemaking.

Working to the asset owner's procedures

On renewables sites, your permission to fly from the regulator is only half of it. The asset owner's safe systems of work usually decide when and how you fly, and your documents need to fit inside theirs.

Blade inspections are normally flown with the turbine stopped and the rotor held in a set position under the owner's procedures, so agree the turbine state and the handover process in writing. Steel towers, substations, inverters and cabling can disturb a drone's compass and satellite positioning (GNSS), so plan for calibration away from structures, sensible stand-off distances and a pilot who is practised in flying without position hold. Where overhead lines cross a site, the Health and Safety Executive's GS6 guidance on overhead power lines is a useful reference for planning.

  • Site inductions, permits to work and lone working rules
  • Method statements and risk assessments in the client's format
  • Construction phase rules under CDM 2015 when a site is still being built
  • Global Wind Organization (GWO) Basic Safety Training if anyone will go onto or into a turbine
  • Emergency and incident reporting that feeds both your system and the owner's

Good practice and deliverables

Clients need findings they can act on. Blade imagery should be referenced to turbine, blade, side and position along the blade, with defects classified to the owner's scheme where they have one. Solar thermography is commonly specified against IEC TS 62446-3, the technical specification for outdoor infrared thermography of PV plants, which covers equipment, ambient conditions, procedure, reporting and personnel qualification.

Agree file formats, naming, delivery platform and turnaround before the first flight. A repeatable flight plan per asset makes year-on-year comparison far more useful to the client.

What a consultant does and doesn't do

A consultant can map your permissions against the sites you want to work on, write renewables-specific procedures and risk assessments, prepare a UK SORA application for BVLOS or tall-structure work, align your documents with a client's prequalification, and set up training and quality checks for your crews and analysts.

They cannot promise a regulatory outcome or a contract, and they do not replace the asset owner's own safety sign-off. Agree scope, deliverables and ownership of documents at the start.

What to ask before hiring, and common mistakes

Ask which regulators the consultant has secured authorizations with, whether they have written procedures for turbine or solar work, and how they would handle a specific client's safety requirements. Consultants listed on DOC are vetted (identity, legal entity, sanctions screening and professional indemnity insurance), with regulator experience shown as verified only where evidenced.

Common mistakes include:

  • Assuming the 120m limit does not apply at a wind farm without checking the structure exception
  • Arriving on site with generic risk assessments the client will not accept
  • Ignoring interference near substations, inverters and steel towers
  • Flying solar thermography in unsuitable sunlight or wind
  • Delivering images without asset referencing or defect classification

Common questions

Can I fly above 120m to inspect a wind turbine in the UK?

Only within a narrow exception. If the structure is taller than 105m and the person responsible for it asks you to carry out a task on it, you may fly above 120m, staying within 50m of it horizontally and no more than 15m above it. Anything else needs specific permission from the Civil Aviation Authority.

Are wind turbine blades inspected with the turbine running?

Blade inspections are normally flown with the turbine stopped and the rotor held in position under the asset owner's procedures. Flying near moving blades adds collision and turbulence risk that would need to be justified in your risk assessment and accepted by the owner. Agree the turbine state in writing before mobilising.

Which standard applies to drone thermography of solar farms?

IEC TS 62446-3 is the technical specification most often named. It covers outdoor infrared thermography of PV modules and plants, including equipment, ambient conditions, inspection procedure, reporting and personnel qualification, and recognizes drone surveys. Check the current edition and any client-specific requirements before quoting to it.

How does electromagnetic interference affect drone inspections?

Strong magnetic fields and large steel structures, such as substations, inverters, cabling and turbine towers, can disturb a drone's compass and satellite positioning. Calibrate away from the structure, keep sensible stand-off distances, watch for warnings, and make sure pilots are practised in flying without position hold.

Do drone pilots need GWO training for wind farm work?

Not for flying itself. Global Wind Organization Basic Safety Training covers working at height, first aid, manual handling, fire awareness and sea survival for people working on turbines. Asset owners may require it if any of your team will go onto or into a turbine, or for offshore work, so check the client's requirements early.